 |
Leons P K
- Dosage : 1/6 to 1/8 of Peroxide
- Appearance : Dark Brown Liquid
- Machines : Drum Washer / Jigger / Open wash / Winch / Softflow
- Working PH / Temp : 4.0 to 5.0 / 50 to 55 Deg C
- Time : 40 to 60 min
- Material : Cotton / Rayon / Denim
- Process : Adjust bath PH - Add peroxide killer - Raise temp - Give time - Cold wash
- Precautions : Add Acid for high fadding required adjust Ph 4.5 and temp 55Deg C
|
 |
D-FOAM
- Dosage : 0.05 to 0.2 gpl for disperse dye baths , 0.01 to 0.1 gpl for scouring and other general applications
- Appearance : Milky white
- Ionic Nature : Non ionic
- Solubility : Dispersible in cold water to give opalescent emulsion
|
 |
STAB EZ
- Dosage : 0.3 to 1.0 gpl for disperse dye baths
- Appearance : Pale yellow clear liqued
- ionic character : anionic
- chemical character : blend of organic & inorganic components
|
 |
catanizer LE
- Cotton fabric is usually dyed with reactive dyes. During the dyeing process, a large amount of salt is required to achieve higher exhaustion of the dye from the dyebath onto the fiber. Dyeing of cotton with reactive dyes has a substantial environmental impact due to the discharge of a large volume of highly colored and saline effluents. Chemical cationization allows cotton fibers to be dyed without salt by chemically modifying cellulosic macromolecules to introduce positively charged sites
|
 |
FIX NF
- Dosage : 0.5 to 2.5 % owf
- Appearance : Colour less to Pale yellow Liquid
- Ionic Nature : Cationic
- solubility : Soluble in water
- Working PH / temp : 5.5 to 6.5 / Room Temp
- Time : 20 to 30 Min
|
 |
FIX F CONC
- Appearance : Colourless liquid.
- Ionic Nature : Cationic
- solubility : Soluble in water
- Stability : Stable to hard water, acetic acid, hydrochloric acid, soluble chlorides and non ionic substrates.
|
 |
FIX F
- Appearance : Colourless liquid
- solubility : Easily miscible in water
- Stability : Stable to hard water, acitic acid,hydrochloric acid,soluble chlorides
|
 |
LUBE CONC- P
- Dosage : 0.5 to 1.0 % owf ( After dilution 1:100)
- Appearance : white Powder
- Ionic Nature : Non ionic
- solubility : Readily soluble in water by continue stirring ( 1 : 100 Dilution)
- Stability : Good in Acid,Alkaline and Hard water
|
 |
LUBE
- Dosage : 0.5 % to 1.0 % owf
- Appearance : Pale yellow coloured Liquid
- Ionic Nature : Non ionic
- Time / Temp 15 : min / Room Temp.
- solubility : Readily soluble in water in all propotion
- Stability : Good in Acid,Alkaline and Hard water
|
 |
MAXI PRIME CONC
- High Performance ABS pest
- PH : 6 to 7,
- dosage : 0.2% to 1 %,
- Liquor Ratio : 1 : 4 to 1 : 7,
- Chemical Nature : Non ionic / Anionic
|
 |
MAXI PRIME PD CONC
- Anti –back-staining agent powder
- Chemical Nature:Non ionic / Anionic,
- PH : 6 to 7
- Dosage : 0.2% to 0.6%,
|
 |
MAXI PRIME PD 60
- Anti –back-staining agent powder
- Chemical Nature:Non ionic / Anionic,
- PH : 6 to 7 ,
- Dosage : 0.5% to 2 %,
|
 |
MAXI PRIME 30
- Anti –back-staining agent powder
- Chemical Nature:Non ionic / Anionic,
- pH : 6 to 7
- Dosage : 0.9% to 3 %,
|